Page 1 of 1
Afixing props to shaft - how?
Posted: 24 Sep 2014 15:04
by RAAFieChappie
I've received a new brass 40 mm prop from Floataboat (thanks Rhonda) and it fitted straight onto my existing M4 prop shaft. Phew! Is it necessary to fix the prop onto the shaft permanently with solder or locktite? I imagine in time it could fall off in the middle of the pond if not careful.
cheers,
Paul
Re: Afixing props to shaft - how?
Posted: 24 Sep 2014 17:59
by BsHvyCgn9
Re: Afixing props to shaft - how?
Posted: 24 Sep 2014 19:17
by HelloSailor
Hi Paul , Yes I agree with Bruce regarding using Loctite 243 , but make sure it is " Medium " strength . I would also wind on a brass or stainless steel nut onto the thread before afixing the prop, put a drop of loctite into the thread of the prop and thread onto shaft , locking nut against prop once wound onto shaft. Guarantee you won't lose your prop. Reason for Medium strength is best if you ever need to remove prop.
Cheers, Jim