Page 1 of 1
Bog or resin & fibreglass
Posted: 01 Sep 2019 22:32
by kitlowran
Dumb question,
What's the preferred method of sealing around hull openings - i.e. prop shafts, rudder posts, A brackets?
Bog, or resin and fibreglass?
Many thanks
Re: Bog or resin & fibreglass
Posted: 02 Sep 2019 00:43
by BsHvyCgn9
Re: Bog or resin & fibreglass
Posted: 02 Sep 2019 10:29
by RussF172
I'm similar. I use an auto bog for setting the shafts in place then lay chop strand mat and resin over it once all looks good.
Re: Bog or resin & fibreglass
Posted: 02 Sep 2019 14:45
by Ahoythere
I use the fibre bog as it is waterproof unlike normal car bog. I still resin and chop strand over the bog though.
Re: Bog or resin & fibreglass
Posted: 02 Sep 2019 21:58
by kitlowran
Thanks for all the help, much appreciated, bog with resin over the top sounds like a good plan. Hopefully finally get some of these builds going again.