Afixing props to shaft - how?

General Discussion and Questions regarding TF72 and Ship Modelling
RAAFieChappie
Forum Member
Forum Member
Posts: 8
Joined: 08 Sep 2014 14:29
Fleet Base: Non Club Member
My Ship Yard: Bankert tug (Billings kit)

Afixing props to shaft - how?

Postby RAAFieChappie » 24 Sep 2014 15:04

I've received a new brass 40 mm prop from Floataboat (thanks Rhonda) and it fitted straight onto my existing M4 prop shaft. Phew! Is it necessary to fix the prop onto the shaft permanently with solder or locktite? I imagine in time it could fall off in the middle of the pond if not careful.

cheers,

Paul
User avatar
BsHvyCgn9
Club Member
Club Member
Posts: 1856
Joined: 30 Jan 2010 18:33
Fleet Base: Gulf Waters
My Ship Yard: USS Long Beach CGN9
USS California CGN36
USS John Paul Jones DDG53
USS Saipan LHA2
USS Shark SSN591
USS Seawolf SSN21
USS Albany CG10
Location: Adelaide

Re: Afixing props to shaft - how?

Postby BsHvyCgn9 » 24 Sep 2014 17:59

Go with Loctite243!! I once lost a prop off USS Long Beach during early testing for this very reason! In a full reverse situation the prop will unwind off the shaft...


Cheers Bruce (B2) :nuke: :nuke: :nuke: :nuke: :nuke:
HelloSailor
Committee
Committee
Posts: 139
Joined: 31 Jan 2010 10:24
Fleet Base: Gulf Waters
My Ship Yard: HMAS VAMPIRE ( 1980 ) with pre 1980 armament additions
USS MISSOURI BB63 - post 1984 configuration
HMAS Duchess ( Post WWII ) Daring Cl Destroyer
Location: Woodcroft SA

Re: Afixing props to shaft - how?

Postby HelloSailor » 24 Sep 2014 19:17

Hi Paul , Yes I agree with Bruce regarding using Loctite 243 , but make sure it is " Medium " strength . I would also wind on a brass or stainless steel nut onto the thread before afixing the prop, put a drop of loctite into the thread of the prop and thread onto shaft , locking nut against prop once wound onto shaft. Guarantee you won't lose your prop. Reason for Medium strength is best if you ever need to remove prop.
Cheers, Jim

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users